Hello there,
plus sa all b
shows nothing.
that means you don’t have geometric surfaces in your model. If you’re trying to plot finite elment defined surfaces try with plus f <set> (default color is yellow) where < set > is a set containing faces (check using prnt se)
It looks like not much can be seen
prnt se
1 all stat:o n:16 e:2 f:12 p:0 l:0 c:0 s:0 b:0 L:0 S:0 se:0 sh:0 v:0
plus f all
makes my figure yellow. Thank you very much for a tip.