Version 1.6 available with some more features.
Great!
Indeed, development will probably slow down a bit (unless there’s a bug report)
**abq2ccx** 1.6.0 is on PyPI.
```
pipx upgrade abq2ccx # or: pip install -U abq2ccx
```
## What’s new since 1.5
* **More of a deck converts**: geostatic initial stresses, `*IMPERFECTION`, `*EMBEDDED ELEMENT` (rebar, fibres), linear connector elasticity and damping (and `JOINTC`), field-dependent material data, `*DISTRIBUTION` values and `OFFSET TO NODES` orientations, `*INTEGRATED OUTPUT`, `*MATRIX GENERATE`, `*DLOAD CENT` / `ROTA` and mass scaling. A step with several `*LOAD CASE`s becomes one ccx step per case. With `–approximate`, Abaqus general contact runs as contact pairs between the bodies, and an explicit coupled temperature-displacement step as ccx’s implicit coupled step.
* **Closer to Abaqus’ answers**: shell and beam temperatures (initial gradients, `OFFSET` shells), ties between shells and solids, contact pressure and gap-conductance tables in ccx’s meaning, `*DAMPING` and `*MODAL DAMPING` as Abaqus applies them (flagged where ccx can’t), `FIXED` on transformed nodes, pressures and body loads on `CAX8R` / `CPE8R`. The quadratic shells the converter adds now follow the curved surface instead of forming flat facets.
* **Clearer labels**: `C3D8` / `CPE4` / `CAX4` of a plastic, creeping or nearly incompressible material (ccx has no selectively reduced volume terms, so they lock: a thick cylinder on 4 elements through the wall carries 1.4 times its limit pressure), `S3` shells and plastic shell sections are now flagged as reduced physics, each with an `–approximate` alternative.
* **Easier to use**: warnings give the file and line of the card; `–run` streams ccx’s output into a log and takes `–timeout`; `–json` and `–summary` for batches; `tools/build_ccx_umat.py` builds ccx with a deck’s UMAT in one command.
Of the 1052 decks in the test corpus, 246 solve in ccx 2.23, 181 of them with the deck’s own physics (1.5: 235 and 177).
## ccx 2.23 issues
59 are on GitHub now (#212–#299), most of them confirmed here first; thanks to Calc_em and everyone who reproduced them. 27 have a proposed fix as a pull request.
Version 1.7 available with significant improvements.
Translation report and more.
More improvements are possible with the new calculix version and her solved bugs.
Have you found any new CalculiX bugs or all good for now ? I’m asking also because we are likely approaching a new release of CalculiX, so it’s best to report everything we notice ASAP.
I’ll have a look if anything new came up, the fixes here were mainly because I found that a SSD inp file was not running properly (conversion issues), I’ll see if any ccx issues were found and report them today/tomorrow if I can find any new ones
I have a fresh list that I am preparing, I’ll try and start posting after a final check that they are new issues
update: I hit my daily post limit, will post the remaining issues once it has reset.