# Using the feacluster.com ccx install script with Intel HPC Toolkit v2024.1.0

**URL:** <https://calculix.discourse.group/t/using-the-feacluster-com-ccx-install-script-with-intel-hpc-toolkit-v2024-1-0/2220>\
**Category:** Getting started\
**Created:** [April 18, 2024, 7:01pm UTC](https://calculix.discourse.group/t/using-the-feacluster-com-ccx-install-script-with-intel-hpc-toolkit-v2024-1-0/2220 "2024-04-18T19:01:34Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![feacluster](https://yyz2.discourse-cdn.com/free1/user_avatar/calculix.discourse.group/feacluster/32/394_2.png) [@feacluster](https://calculix.discourse.group/u/feacluster)\
**Post date:** [May 1, 2024, 3:00am UTC](https://calculix.discourse.group/t/using-the-feacluster-com-ccx-install-script-with-intel-hpc-toolkit-v2024-1-0/2220/9 "2024-05-01T03:00:55Z")

</div>

For the static build, might be easier to just copy the /opt/intel/oneapi folder to the other host?

In the compare script in the test folder, try adding this line at the top where you see the other ones defined for the .rfn files:

```auto
        if [$i = beam10psmooth.rfn.inp]
        then
            continue
        fi

```

I don’t believe the rfn files are meant to be run by themeslves.

There will be probably be a dozen test cases with different results. See this post for why that happens:

> [@Totally different results between Spooles and Pardiso for frequency calculation](https://calculix.discourse.group/t/totally-different-results-between-spooles-and-pardiso-for-frequency-calculation/872):
>
> I am trying to make sense of why results are totally different for the [simplebeampipe3.inp](https://www.feacluster.com/CalculiX/ccx_2.18/doc/ccx/input_deck_viewer.php?input_deck=simplebeampipe3.inp) verification model. When comparing spooles to pardiso, the Eigenvalues are the same, which is good. But the rest of the results are way off, i.e: P A R T I C I P A T I O N F A C T O R S E F F E C T I V E M O D A L M A S S T O T A L E F F E C T I V E M A S S displacements (vx,vy,vz) for set NALL and time 0.1000000E+01 Here is the reference output from Spooles: …

---

_[View the full topic](https://calculix.discourse.group/t/using-the-feacluster-com-ccx-install-script-with-intel-hpc-toolkit-v2024-1-0/2220)._