# Surface behaviour warning

**URL:** <https://calculix.discourse.group/t/surface-behaviour-warning/2582>\
**Category:** Uncategorized\
**Created:** [February 10, 2025, 8:50am UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582 "2025-02-10T08:50:58Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Aurea](https://avatars.discourse-cdn.com/v4/letter/a/c5a1d2/32.png) [@Aurea](https://calculix.discourse.group/u/Aurea)\
**Post date:** [February 10, 2025, 8:50am UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582/1 "2025-02-10T08:50:58Z")

</div>

Good morning,

I am running a 2D contact problem with node to surface behaviour, but I get this warnings I do not understand. I know they are warnings but would like to undrstand them and try to delete them if possible.  
Can you help me?

> \*Surface, Name=Contactsurf\_P, Type=Element  
> Contact\_P\_elem, S3  
> Contact\_P\_elem\_tip\_r, S4  
> Contact\_P\_elem\_tip\_l, S2  
> \*Surface, Name=Contactsurf\_G, Type=Element  
> Contact\_G\_elem, S3  
> Contact\_G\_elem\_tip\_r, S4  
> Contact\_G\_elem\_tip\_l, S2  
> \*Surface interaction, Name=Contacto  
> \*Surface behavior, Pressure-overclosure=Hard  
> \*Contact pair, Interaction=Contacto, Type=Node to surface, Small sliding  
> Contactsurf\_G, Contactsurf\_P

\*WARNING reading \*SURFACE BEHAVIOR: hard  
behavior is by default reduced to  
linear behavior  
\*WARNING reading \*SURFACE BEHAVIOR. Card image:  
\*SURFACEBEHAVIOR,PRESSURE-OVERCLOSURE=HARD

\*WARNING reading \*SURFACE BEHAVIOR: K must  
be strictly positive  
the following default will be used: 10300000.000000000  
the user is advised to analyze the results  
carefully

\*INFO reading \*SURFACE BEHAVIOR: the tension  
value at large clearances  
(only relevant for node-to-surface contact)  
must be strictly positive  
the following default will be used: 2.9428571428571431  
the user is advised to analyze the results  
carefully

---

<div class="post-metadata">

**Author:** ![Calc\_em](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@Calc\_em](https://calculix.discourse.group/u/Calc_em)\
**Post date:** [February 10, 2025, 9:19am UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582/2 "2025-02-10T09:19:17Z")

</div>

> [@Aurea](#):
>
> \*WARNING reading \*SURFACE BEHAVIOR: hard  
> behavior is by default reduced to  
> linear behavior  
> \*WARNING reading \*SURFACE BEHAVIOR. Card image:  
> \*SURFACEBEHAVIOR,PRESSURE-OVERCLOSURE=HARD

This is just what CalculiX does internally when you use hard contact.

> [@Aurea](#):
>
> \*WARNING reading \*SURFACE BEHAVIOR: K must  
> be strictly positive  
> the following default will be used: 10300000.000000000  
> the user is advised to analyze the results  
> carefully

This is automatically selected contact stiffness when using hard contact.

> [@Aurea](#):
>
> \*INFO reading \*SURFACE BEHAVIOR: the tension  
> value at large clearances  
> (only relevant for node-to-surface contact)  
> must be strictly positive  
> the following default will be used: 2.9428571428571431  
> the user is advised to analyze the results  
> carefully

Another default value.

Here’s an explanation from the CalculiX User’s Manual about all of that:

> Hard pressure-overclosure behavior is internally reduced to linear pressure-overclosure behavior with the default constants.

> The linear pressure-overclosure behavior simulates a linear relationship between the pressure and the overclosure. At zero overclosure the pressure is zero as well. For node-to face penalty contact the user should specify the slope of the pressure-overclosure curve (usually 5 to 50 times the typical Young’s modulus of the adjacent materials; **the default is the first elastic constant of the first encountered material in the input deck multiplied by 50)** and the tension value for large clearances σ∞ (should be small, typically 0.25 % of the maximum stress expected; **the default is the first elastic constant of the first encountered material in the input deck divided by 70,000** ).

---

<div class="post-metadata">

**Author:** ![Aurea](https://avatars.discourse-cdn.com/v4/letter/a/c5a1d2/32.png) [@Aurea](https://calculix.discourse.group/u/Aurea)\
**Post date:** [February 10, 2025, 9:22am UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582/3 "2025-02-10T09:22:34Z")

</div>

Thank so much @Calc_em! I missed that from the user guide!  
In that case it is just a warning to take into account, but I cannot do anything from my input file to delete these warnings!  
Thanks!

---

<div class="post-metadata">

**Author:** ![Calc\_em](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@Calc\_em](https://calculix.discourse.group/u/Calc_em)\
**Post date:** [February 10, 2025, 9:24am UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582/4 "2025-02-10T09:24:33Z")

</div>

> [@Aurea](#):
>
> I cannot do anything from my input file to delete these warnings!

Well, you can choose linear contact and specify the constants manually.

---

<div class="post-metadata">

**Author:** ![xyont](https://yyz2.discourse-cdn.com/free1/user_avatar/calculix.discourse.group/xyont/32/3553_2.png) [@xyont](https://calculix.discourse.group/u/xyont)\
**Post date:** [February 10, 2025, 11:35am UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582/5 "2025-02-10T11:35:59Z")

</div>

> [@Aurea](#):
>
> but I cannot do anything from my input file to delete these warnings!

it can be trace from source code and modify by remove then recompile, but it’ll not have any sense in results.

---

<div class="post-metadata">

**Author:** ![Aurea](https://avatars.discourse-cdn.com/v4/letter/a/c5a1d2/32.png) [@Aurea](https://calculix.discourse.group/u/Aurea)\
**Post date:** [February 10, 2025, 11:36am UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582/6 "2025-02-10T11:36:44Z")

</div>

Right thank you.  
In the following line to this text:

> [@Calc\_em](#):
>
> Hard pressure-overclosure behavior is internally reduced to linear pressureoverclosure behavior with the default constants.

This is written:

> In case of mortar contact true hard behavior can be simulated by omiting the \*SURFACE BEHAVIOR card within the \*SURFACE INTERACTION card.

Is there anyway where I can read what is mortar contact true?? What I want to check is what it changes from what I do in abaqus with a hard surface behaviour and what i am doing in calculix. I would like both to be the most similar.

Thank you very much

---

<div class="post-metadata">

**Author:** ![Calc\_em](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@Calc\_em](https://calculix.discourse.group/u/Calc_em)\
**Post date:** [February 10, 2025, 11:49am UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582/7 "2025-02-10T11:49:06Z")

</div>

> [@Aurea](#):
>
> Is there anyway where I can read what is mortar contact true?? What I want to check is what it changes from what I do in abaqus with a hard surface behaviour and what i am doing in calculix. I would like both to be the most similar.

This type of contact is described in the section _6.7.8 Face-to-Face Mortar Contact_ (page 244). It uses Lagrange multipliers while the standard node-to-face or face-to-face contact is of penalty type.

---

<div class="post-metadata">

**Author:** ![xyont](https://yyz2.discourse-cdn.com/free1/user_avatar/calculix.discourse.group/xyont/32/3553_2.png) [@xyont](https://calculix.discourse.group/u/xyont)\
**Post date:** [February 10, 2025, 1:48pm UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582/8 "2025-02-10T13:48:31Z")

</div>

> [@Aurea](#):
>
> What I want to check is what it changes from what I do in abaqus with a hard surface behaviour and what i am doing in calculix

interesting in computational times and convergences please reported, as i know Abaqus did not have advanced Mortar contact type, Ansys also but LS Dyna has.

---

<div class="post-metadata">

**Author:** ![Aurea](https://avatars.discourse-cdn.com/v4/letter/a/c5a1d2/32.png) [@Aurea](https://calculix.discourse.group/u/Aurea)\
**Post date:** [February 11, 2025, 6:57am UTC](https://calculix.discourse.group/t/surface-behaviour-warning/2582/9 "2025-02-11T06:57:48Z")

</div>

I will report about the obtained results of course! More after the help provided. However, still not able to make it work 😕
