# Steady state dynamics randomly terminates without error

**URL:** <https://calculix.discourse.group/t/steady-state-dynamics-randomly-terminates-without-error/1279>\
**Category:** Uncategorized\
**Created:** [October 5, 2022, 5:01pm UTC](https://calculix.discourse.group/t/steady-state-dynamics-randomly-terminates-without-error/1279 "2022-10-05T17:01:18Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Matej](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@Matej](https://calculix.discourse.group/u/Matej)\
**Post date:** [February 7, 2023, 2:05pm UTC](https://calculix.discourse.group/t/steady-state-dynamics-randomly-terminates-without-error/1279/7 "2023-02-07T14:05:41Z")

</div>

Then I tried the CalculiX version from @prool: [CalculiX 2.20 for Win64](https://calculix.discourse.group/t/calculix-2-20-for-win64/1420)

I tried it with steady state dynamics up to 100.000 nodes and I got the results every time I tried it. It has some problems with PrePoMax, so I had to add compatibility mode to get it to work but running it from command line works fine. The results can also be read without a problem.

Now I am wondering what is the actual difference between the official CalculiX version and the version compiled by @prool.

---

_[View the full topic](https://calculix.discourse.group/t/steady-state-dynamics-randomly-terminates-without-error/1279)._