# Send dep indep abq gap 1. 0. 0

**URL:** <https://calculix.discourse.group/t/send-dep-indep-abq-gap-1-0-0/660>\
**Category:** Uncategorized\
**Created:** [July 2, 2021, 7:46am UTC](https://calculix.discourse.group/t/send-dep-indep-abq-gap-1-0-0/660 "2021-07-02T07:46:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ricarvalhal](https://avatars.discourse-cdn.com/v4/letter/r/90db22/32.png) [@Ricarvalhal](https://calculix.discourse.group/u/Ricarvalhal)\
**Post date:** [July 2, 2021, 7:46am UTC](https://calculix.discourse.group/t/send-dep-indep-abq-gap-1-0-0/660/1 "2021-07-02T07:46:07Z")

</div>

Dears,  
do you know if there is a possibility to define the gap in this command ? It assumes the geometric gap between the parts.  
Thanks