# \*SECTION PRINT in ccx2.17 does not work

**URL:** <https://calculix.discourse.group/t/section-print-in-ccx2-17-does-not-work/334>\
**Category:** Uncategorized\
**Created:** [December 8, 2020, 1:50pm UTC](https://calculix.discourse.group/t/section-print-in-ccx2-17-does-not-work/334 "2020-12-08T13:50:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![paffins](https://avatars.discourse-cdn.com/v4/letter/p/a88e57/32.png) [@paffins](https://calculix.discourse.group/u/paffins)\
**Post date:** [December 8, 2020, 1:50pm UTC](https://calculix.discourse.group/t/section-print-in-ccx2-17-does-not-work/334/1 "2020-12-08T13:50:33Z")

</div>

i want ro print out FLUX from a given set of element surfaces. ive managed to get it done in ccx2.13 but in ccx2.17 it doesnt work and i get this error:

> \*WARNING in calinput. Card image cannot be interpreted:  
> \*WARNING reading the input file. Card image:  
> \*SECTIONPRINT,SURFACE=LEFT\_N,NAME=SP1

i tried multiple times with different syntax but it doesnt work. i can not use ccx2.13 since it does not support necessary features for calculation. i would be happy to hear some advice or experiences regarding that issue.

---

<div class="post-metadata">

**Author:** ![jbr](https://avatars.discourse-cdn.com/v4/letter/j/ecccb3/32.png) [@jbr](https://calculix.discourse.group/u/jbr)\
**Post date:** [December 8, 2020, 8:12pm UTC](https://calculix.discourse.group/t/section-print-in-ccx2-17-does-not-work/334/2 "2020-12-08T20:12:54Z")

</div>

Hi @paffins, could you check if the order of the keywords has changed in the calinput file? Also, you could check if the keyword parameters have changed.