Hi everyone,
Hopefully a short paid-work post is fine here; if not, moderators, please remove it.
I’m Jeroen. I’m running a project with a steady flow of structural FEA tasks, all solved with CalculiX (ccx), mostly prepared in PrePoMax and meshed with Gmsh. I’m looking for engineers who have actually used CalculiX on real projects, in two roles.
What the work involves:
- Turning a real CAD part or small assembly (STEP) into a clean analysis model
- Mostly static analyses, with some contact, bolt pretension, plasticity, buckling and modal steps
- Writing a precise brief and building a validated reference solution: mesh convergence, a converged solve, and a result you can defend
Role 1: FEA engineer (several people)
- Solid hands-on FEA experience and real project work in CalculiX. PrePoMax, cgx, FreeCAD or writing input decks directly are all fine
- Careful, independent work matters more than being a top specialist
- Abaqus experience helps (similar keyword format)
- 20–40 h/week, €70–100/h depending on experience
Role 2: CalculiX expert (one person)
- Deep knowledge of the solver itself: contact formulations and penalty settings, convergence control, solver choice (SPOOLES, PaStiX), and where ccx behaves differently from commercial codes
- Handles the hardest analyses and helps the other engineers when they get stuck
- Flexible hours, at a higher rate (€100+/h)
Both roles:
- Remote and freelance, through end of November and possibly longer
- Start as soon as possible, beginning with a short call and a paid trial task
If this sounds like you, send me a private message with a short note on your FEA background, which role you’re after, and a link to your profile or some CalculiX work you’ve done.
Many thanks to Guido, Klaus and everyone who keeps CalculiX going.
Jeroen