Summary
The trigger is a material with *DEPVAR but no nonlinear material law (no user material, no plasticity), so the *STATIC step runs through linstatic.c. If that step requests SDV on *EL FILE, ccx gets a segmentation fault when it computes the output. linstatic.c never allocates xstaten, the nodal array that resultsprint.f extrapolates the state variables into for the .frd file; nonlingeo.c does allocate it.
The same deck runs with *EL PRINT (SDV printed as 0), with *EL FILE without SDV, without *DEPVAR, and with NLGEOM; in each of those cases it finishes normally. Master (9ba5d76) still has the bug: linstatic.c still has no NNEW(xstaten,...).
Version
ccx 2.23 (conda-forge build pl5321h484372f_2, macOS arm64).
Already reported or fixed?
Not reported: there is no matching GitHub issue (open or closed) or open pull request in Dhondtguido/CalculiX, and no calculix.discourse.group topic (searched 19 Oct 2026). Not fixed: the routine involved is unchanged on master, and conda-forge’s latest 2.23 build (pl5321hd17ca8b_8, which carries about 40 extra patches) gives the same output.
Minimal input
sdv_file.inp:
*HEADING
Unit cube, linear elastic, *DEPVAR in the material, SDV requested on *EL FILE
*NODE
1, 0., 0., 0.
2, 1., 0., 0.
3, 1., 1., 0.
4, 0., 1., 0.
5, 0., 0., 1.
6, 1., 0., 1.
7, 1., 1., 1.
8, 0., 1., 1.
*ELEMENT, TYPE=C3D8, ELSET=EALL
1, 1, 2, 3, 4, 5, 6, 7, 8
*NSET, NSET=X0
1, 4, 5, 8
*NSET, NSET=X1
2, 3, 6, 7
*NSET, NSET=Y0
1, 2, 5, 6
*NSET, NSET=Z0
1, 2, 3, 4
*MATERIAL, NAME=STEEL
*ELASTIC
200000., 0.3
*DEPVAR
2
*SOLID SECTION, ELSET=EALL, MATERIAL=STEEL
*BOUNDARY
X0, 1, 1
Y0, 2, 2
Z0, 3, 3
*STEP
*STATIC
*BOUNDARY
X1, 1, 1, 0.001
*EL FILE
S, SDV
*END STEP
How to run
ccx sdv_file
Expected
The job finishes and the .frd file holds an SDV block with SDV1 and SDV2 = 0 at all 8 nodes. That is what the same deck gives with *STEP, NLGEOM:
-4 SDV 2 1
-5 SDV1 1 1 0 0
-5 SDV2 1 1 0 0
-1 1 0.00000E+00 0.00000E+00
...
With *EL PRINT instead of *EL FILE, the .dat file lists the 2 state variables as 0 at the 8 integration points.
Actual
ccx is killed by SIGSEGV (exit status 139) after the solve. The end of stdout is:
Factoring the system of equations using the symmetric spooles solver
Using 1 cpu for spooles.
Using up to 1 cpu(s) for the stress calculation.
The .frd file then holds only its first two lines.
Where it goes wrong
src/linstatic.c declares *xstaten=NULL (line 100) and passes it to results() and frd(), but never allocates it. Its two output blocks (lines 568-572 and 797-802) allocate the other nodal output fields only:
if(strcmp1(&filab[261],"E ")==0) NNEW(een,double,6**nk);
if(strcmp1(&filab[2697],"ME ")==0) NNEW(emn,double,6**nk);
if(strcmp1(&filab[522],"ENER")==0) NNEW(enern,double,*nk);
if(strcmp1(&filab[2175],"CONT")==0) NNEW(cdn,double,6**nk);
src/resultsprint.f then writes into it when SDV is in filab:
if(filab(8)(1:4).eq.'SDV ') then
nfield=nstate_
...
call extrapolate(xstate,xstaten,ipkon,inum,kon,lakon,nfield,nk,
src/nonlingeo.c (line 3790 and line 3949) allocates it:
if(strcmp1(&filab[609],"SDV ")==0) NNEW(xstaten,double,*nstate_**nk);
Without *DEPVAR, nstate_ is 0 and nothing is written, which is why the crash needs *DEPVAR.
Fix
In both output blocks of linstatic.c, allocate xstaten like nonlingeo.c does, and free it with the others:
if(strcmp1(&filab[609],"SDV ")==0) NNEW(xstaten,double,*nstate_**nk);
...
if(strcmp1(&filab[609],"SDV ")==0) SFREE(xstaten);
Workaround: request SDV on *EL PRINT, or leave it off *EL FILE in linear steps.