# Large rotation shell benchmark test

**URL:** <https://calculix.discourse.group/t/large-rotation-shell-benchmark-test/401>\
**Category:** Uncategorized\
**Created:** [January 11, 2021, 6:56pm UTC](https://calculix.discourse.group/t/large-rotation-shell-benchmark-test/401 "2021-01-11T18:56:30Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![vicmw](https://avatars.discourse-cdn.com/v4/letter/v/6de8d8/32.png) [@vicmw](https://calculix.discourse.group/u/vicmw)\
**Post date:** [January 11, 2021, 9:45pm UTC](https://calculix.discourse.group/t/large-rotation-shell-benchmark-test/401/2 "2021-01-11T21:45:34Z")

</div>

You’re not supposed to exceed 90 degrees with moment load on shells in static:

_[…] the user applied a rotation or a moment to a node.[…] in static calculations, starting with version 2.8 this type of loading is handled by using mean rotation MPC’s […] the rotation in a mean rotation MPC should not exceed 90 degrees._

Perhaps create a moment using opposing \*DLOADs on two surfaces at the tip of the strip. I’ve done a rolled strip like that before, but not sure if it was CCX shells or not.

---

_[View the full topic](https://calculix.discourse.group/t/large-rotation-shell-benchmark-test/401)._
