# How can I check the force direction?

**URL:** <https://calculix.discourse.group/t/how-can-i-check-the-force-direction/1613>\
**Category:** Uncategorized\
**Created:** [April 21, 2023, 8:26am UTC](https://calculix.discourse.group/t/how-can-i-check-the-force-direction/1613 "2023-04-21T08:26:59Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Awareness](https://avatars.discourse-cdn.com/v4/letter/a/82dd89/32.png) [@Awareness](https://calculix.discourse.group/u/Awareness)\
**Post date:** [April 21, 2023, 8:26am UTC](https://calculix.discourse.group/t/how-can-i-check-the-force-direction/1613/1 "2023-04-21T08:26:59Z")

</div>

Hello there,

There is nothing to add so far.

---

<div class="post-metadata">

**Author:** ![dichtstoff](https://avatars.discourse-cdn.com/v4/letter/d/dec6dc/32.png) [@dichtstoff](https://calculix.discourse.group/u/dichtstoff)\
**Post date:** [April 21, 2023, 10:10am UTC](https://calculix.discourse.group/t/how-can-i-check-the-force-direction/1613/2 "2023-04-21T10:10:07Z")

</div>

you can check your force direction with:

\*NODE PRINT  
RF

wbr

---

<div class="post-metadata">

**Author:** ![Awareness](https://avatars.discourse-cdn.com/v4/letter/a/82dd89/32.png) [@Awareness](https://calculix.discourse.group/u/Awareness)\
**Post date:** [April 21, 2023, 1:21pm UTC](https://calculix.discourse.group/t/how-can-i-check-the-force-direction/1613/4 "2023-04-21T13:21:49Z")

</div>

Thank you, I will try.

---

<div class="post-metadata">

**Author:** ![Awareness](https://avatars.discourse-cdn.com/v4/letter/a/82dd89/32.png) [@Awareness](https://calculix.discourse.group/u/Awareness)\
**Post date:** [April 21, 2023, 2:01pm UTC](https://calculix.discourse.group/t/how-can-i-check-the-force-direction/1613/5 "2023-04-21T14:01:21Z")

</div>

> [@dichtstoff](#):
>
> \*NODE PRINT

must be followed with NSET=some-node-set. And in my case I do not have node sets but I i have several files.dlo that are included with \*INCLUDE, INPUT=file.dlo may be I have to  
\*ELSET, ELSET=my-set  
33, P1, 9109240  
41, P1, 9109240  
33, P6, 9109240  
34, P1, 9109240  
42, P1, 9109240  
34, P6, 9109240

NODE PRINT, ELSET=my-set  
RF

I give it a try

NO way

\*ERROR reading \*NSET/ELSET: element set P1  
has not been defined yet

STEP 1

Static analysis was selected

\*ERROR in calinput: at least one fatal  
error message while reading the  
input deck: CalculiX stops.

Looks like NODE PRINT will do only with NSET so.

Faces are made from nodes, is there a way to make a set of nodes from faces included in files.dlo?

\*EL PRINT is no use for my case

---

<div class="post-metadata">

**Author:** ![dichtstoff](https://avatars.discourse-cdn.com/v4/letter/d/dec6dc/32.png) [@dichtstoff](https://calculix.discourse.group/u/dichtstoff)\
**Post date:** [April 21, 2023, 3:47pm UTC](https://calculix.discourse.group/t/how-can-i-check-the-force-direction/1613/6 "2023-04-21T15:47:14Z")

</div>

> [@How to define a load on file.nam](https://calculix.discourse.group/t/how-to-define-a-load-on-file-nam/1601/4):
>
> ELOAD,P3,200000 these is the way \*NODE, NSET=Nbeam 1,-5.000000000000e-01,5.000000000000e-01,0.000000000000e+00 2,0.000000000000e+00,5.000000000000e-01,0.000000000000e+00 3,0.000000000000e+00,5.000000000000e-01,1.000000000000e+00 4,-5.000000000000e-01,5.000000000000e-01,1.000000000000e+00 5,-5.000000000000e-01,0.000000000000e+00,0.000000000000e+00 6,0.000000000000e+00,0.000000000000e+00,0.000000000000e+00 7,0.000000000000e+00,0.000000000000e+00,1…

\*NSET,NSET=check  
45

\*NODE PRINT, NSET=check  
RF

\*.dat file:

forces (fx,fy,fz) for set CHECK and time 0.1000000E+01

```
    45 -3.554101E-13 5.000000E+00 2.933209E-13

```

---

<div class="post-metadata">

**Author:** ![Awareness](https://avatars.discourse-cdn.com/v4/letter/a/82dd89/32.png) [@Awareness](https://calculix.discourse.group/u/Awareness)\
**Post date:** [April 26, 2023, 6:02am UTC](https://calculix.discourse.group/t/how-can-i-check-the-force-direction/1613/7 "2023-04-26T06:02:19Z")

</div>

I run into oops

beam-nam-rf.inp

\*NODE, NSET=Nbeam  
1,-5.000000000000e-01,5.000000000000e-01,0.000000000000e+00  
2,0.000000000000e+00,5.000000000000e-01,0.000000000000e+00  
3,0.000000000000e+00,5.000000000000e-01,1.000000000000e+00  
4,-5.000000000000e-01,5.000000000000e-01,1.000000000000e+00  
5,-5.000000000000e-01,0.000000000000e+00,0.000000000000e+00  
6,0.000000000000e+00,0.000000000000e+00,0.000000000000e+00  
7,0.000000000000e+00,0.000000000000e+00,1.000000000000e+00  
8,-5.000000000000e-01,0.000000000000e+00,1.000000000000e+00  
9,0.000000000000e+00,5.000000000000e-01,2.000000000000e+00  
10,-5.000000000000e-01,5.000000000000e-01,2.000000000000e+00  
11,0.000000000000e+00,0.000000000000e+00,2.000000000000e+00  
12,-5.000000000000e-01,0.000000000000e+00,2.000000000000e+00  
13,0.000000000000e+00,5.000000000000e-01,3.000000000000e+00  
14,-5.000000000000e-01,5.000000000000e-01,3.000000000000e+00  
15,0.000000000000e+00,0.000000000000e+00,3.000000000000e+00  
16,-5.000000000000e-01,0.000000000000e+00,3.000000000000e+00  
17,0.000000000000e+00,5.000000000000e-01,4.000000000000e+00  
18,-5.000000000000e-01,5.000000000000e-01,4.000000000000e+00  
19,0.000000000000e+00,0.000000000000e+00,4.000000000000e+00  
20,-5.000000000000e-01,0.000000000000e+00,4.000000000000e+00  
21,0.000000000000e+00,5.000000000000e-01,5.000000000000e+00  
22,-5.000000000000e-01,5.000000000000e-01,5.000000000000e+00  
23,0.000000000000e+00,0.000000000000e+00,5.000000000000e+00  
24,-5.000000000000e-01,0.000000000000e+00,5.000000000000e+00  
25,0.000000000000e+00,5.000000000000e-01,6.000000000000e+00  
26,-5.000000000000e-01,5.000000000000e-01,6.000000000000e+00  
27,0.000000000000e+00,0.000000000000e+00,6.000000000000e+00  
28,-5.000000000000e-01,0.000000000000e+00,6.000000000000e+00  
29,0.000000000000e+00,5.000000000000e-01,7.000000000000e+00  
30,-5.000000000000e-01,5.000000000000e-01,7.000000000000e+00  
31,0.000000000000e+00,0.000000000000e+00,7.000000000000e+00  
32,-5.000000000000e-01,0.000000000000e+00,7.000000000000e+00  
33,0.000000000000e+00,5.000000000000e-01,8.000000000000e+00  
34,-5.000000000000e-01,5.000000000000e-01,8.000000000000e+00  
35,0.000000000000e+00,0.000000000000e+00,8.000000000000e+00  
36,-5.000000000000e-01,0.000000000000e+00,8.000000000000e+00  
37,-5.000000000000e-01,-5.000000000000e-01,0.000000000000e+00  
38,0.000000000000e+00,-5.000000000000e-01,0.000000000000e+00  
39,0.000000000000e+00,-5.000000000000e-01,1.000000000000e+00  
40,-5.000000000000e-01,-5.000000000000e-01,1.000000000000e+00  
41,0.000000000000e+00,-5.000000000000e-01,2.000000000000e+00  
42,-5.000000000000e-01,-5.000000000000e-01,2.000000000000e+00  
43,0.000000000000e+00,-5.000000000000e-01,3.000000000000e+00  
44,-5.000000000000e-01,-5.000000000000e-01,3.000000000000e+00  
45,0.000000000000e+00,-5.000000000000e-01,4.000000000000e+00  
46,-5.000000000000e-01,-5.000000000000e-01,4.000000000000e+00  
47,0.000000000000e+00,-5.000000000000e-01,5.000000000000e+00  
48,-5.000000000000e-01,-5.000000000000e-01,5.000000000000e+00  
49,0.000000000000e+00,-5.000000000000e-01,6.000000000000e+00  
50,-5.000000000000e-01,-5.000000000000e-01,6.000000000000e+00  
51,0.000000000000e+00,-5.000000000000e-01,7.000000000000e+00  
52,-5.000000000000e-01,-5.000000000000e-01,7.000000000000e+00  
53,0.000000000000e+00,-5.000000000000e-01,8.000000000000e+00  
54,-5.000000000000e-01,-5.000000000000e-01,8.000000000000e+00  
55,5.000000000000e-01,5.000000000000e-01,0.000000000000e+00  
56,5.000000000000e-01,5.000000000000e-01,1.000000000000e+00  
57,5.000000000000e-01,0.000000000000e+00,0.000000000000e+00  
58,5.000000000000e-01,0.000000000000e+00,1.000000000000e+00  
59,5.000000000000e-01,5.000000000000e-01,2.000000000000e+00  
60,5.000000000000e-01,0.000000000000e+00,2.000000000000e+00  
61,5.000000000000e-01,5.000000000000e-01,3.000000000000e+00  
62,5.000000000000e-01,0.000000000000e+00,3.000000000000e+00  
63,5.000000000000e-01,5.000000000000e-01,4.000000000000e+00  
64,5.000000000000e-01,0.000000000000e+00,4.000000000000e+00  
65,5.000000000000e-01,5.000000000000e-01,5.000000000000e+00  
66,5.000000000000e-01,0.000000000000e+00,5.000000000000e+00  
67,5.000000000000e-01,5.000000000000e-01,6.000000000000e+00  
68,5.000000000000e-01,0.000000000000e+00,6.000000000000e+00  
69,5.000000000000e-01,5.000000000000e-01,7.000000000000e+00  
70,5.000000000000e-01,0.000000000000e+00,7.000000000000e+00  
71,5.000000000000e-01,5.000000000000e-01,8.000000000000e+00  
72,5.000000000000e-01,0.000000000000e+00,8.000000000000e+00  
73,5.000000000000e-01,-5.000000000000e-01,0.000000000000e+00  
74,5.000000000000e-01,-5.000000000000e-01,1.000000000000e+00  
75,5.000000000000e-01,-5.000000000000e-01,2.000000000000e+00  
76,5.000000000000e-01,-5.000000000000e-01,3.000000000000e+00  
77,5.000000000000e-01,-5.000000000000e-01,4.000000000000e+00  
78,5.000000000000e-01,-5.000000000000e-01,5.000000000000e+00  
79,5.000000000000e-01,-5.000000000000e-01,6.000000000000e+00  
80,5.000000000000e-01,-5.000000000000e-01,7.000000000000e+00  
81,5.000000000000e-01,-5.000000000000e-01,8.000000000000e+00  
\*ELEMENT, TYPE=C3D8, ELSET=Ebeam  
1, 1, 2, 3, 4, 5, 6, 7, 8  
2, 4, 3, 9, 10, 8, 7, 11, 12  
3, 10, 9, 13, 14, 12, 11, 15, 16  
4, 14, 13, 17, 18, 16, 15, 19, 20  
5, 18, 17, 21, 22, 20, 19, 23, 24  
6, 22, 21, 25, 26, 24, 23, 27, 28  
7, 26, 25, 29, 30, 28, 27, 31, 32  
8, 30, 29, 33, 34, 32, 31, 35, 36  
9, 5, 6, 7, 8, 37, 38, 39, 40  
10, 8, 7, 11, 12, 40, 39, 41, 42  
11, 12, 11, 15, 16, 42, 41, 43, 44  
12, 16, 15, 19, 20, 44, 43, 45, 46  
13, 20, 19, 23, 24, 46, 45, 47, 48  
14, 24, 23, 27, 28, 48, 47, 49, 50  
15, 28, 27, 31, 32, 50, 49, 51, 52  
16, 32, 31, 35, 36, 52, 51, 53, 54  
17, 2, 55, 56, 3, 6, 57, 58, 7  
18, 3, 56, 59, 9, 7, 58, 60, 11  
19, 9, 59, 61, 13, 11, 60, 62, 15  
20, 13, 61, 63, 17, 15, 62, 64, 19  
21, 17, 63, 65, 21, 19, 64, 66, 23  
22, 21, 65, 67, 25, 23, 66, 68, 27  
23, 25, 67, 69, 29, 27, 68, 70, 31  
24, 29, 69, 71, 33, 31, 70, 72, 35  
25, 6, 57, 58, 7, 38, 73, 74, 39  
26, 7, 58, 60, 11, 39, 74, 75, 41  
27, 11, 60, 62, 15, 41, 75, 76, 43  
28, 15, 62, 64, 19, 43, 76, 77, 45  
29, 19, 64, 66, 23, 45, 77, 78, 47  
30, 23, 66, 68, 27, 47, 78, 79, 49  
31, 27, 68, 70, 31, 49, 79, 80, 51  
32, 31, 70, 72, 35, 51, 80, 81, 53

\*NSET,NSET=Nfix  
1, 2, 5, 6, 37, 38, 55, 57, 73,

\*ELSET,ELSET=Eload  
9, 10 ,11, 12, 13, 14, 15, 16  
25, 26 ,27, 28, 29, 30, 31, 32

\*MATERIAL,NAME=EL  
\*ELASTIC  
2e6,0.3  
\*SOLID SECTION,ELSET=Ebeam,MATERIAL=EL

\*DENSITY  
7.86E-9

\*NSET,NSET=check  
45

\*BOUNDARY  
Nfix,1,3,0

\*STEP  
\*STATIC  
\*DLOAD  
\*\*Ebeam,GRAV,9810.,0.,0.,-1.  
Eload,P2,10  
\*NODE PRINT, NSET=check  
RF  
\*NODE FILE  
U  
\*EL FILE  
S  
\*END STEP

I do not find how to see the direction of an applied force in cgx drawing area. There is no Toggle in the cgx pop up menu.  
\*.dat

forces (fx,fy,fz) for set CHECK and time 0.1000000E+01

```
    45 -6.658216E-13 5.000000E+00 -1.008083E-13

```
