# Creep properties interpolation problem?

**URL:** <https://calculix.discourse.group/t/creep-properties-interpolation-problem/2355>\
**Category:** Uncategorized\
**Created:** [July 26, 2024, 10:41am UTC](https://calculix.discourse.group/t/creep-properties-interpolation-problem/2355 "2024-07-26T10:41:41Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![flani](https://avatars.discourse-cdn.com/v4/letter/f/ea5d25/32.png) [@flani](https://calculix.discourse.group/u/flani)\
**Post date:** [July 26, 2024, 11:36am UTC](https://calculix.discourse.group/t/creep-properties-interpolation-problem/2355/2 "2024-07-26T11:36:04Z")

</div>

OK i finally found out that Calculix does not like to interpolate the temperature stress exponent data. Whenever i use a temperature dependent stress exponent, results are off when the temperature map is not uniform. So FYI, it is better to fit you rexperimental data only assuming a temperature dependent creep coefficient, and a best fitted but constant stress exponent.

---

_[View the full topic](https://calculix.discourse.group/t/creep-properties-interpolation-problem/2355)._
