# Contact results for \*TIE contact?

**URL:** <https://calculix.discourse.group/t/contact-results-for-tie-contact/2879>\
**Category:** Model setup\
**Created:** [September 23, 2025, 1:36pm UTC](https://calculix.discourse.group/t/contact-results-for-tie-contact/2879 "2025-09-23T13:36:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![calc4fem](https://avatars.discourse-cdn.com/v4/letter/c/3da27b/32.png) [@calc4fem](https://calculix.discourse.group/u/calc4fem)\
**Post date:** [September 23, 2025, 1:36pm UTC](https://calculix.discourse.group/t/contact-results-for-tie-contact/2879/1 "2025-09-23T13:36:35Z")

</div>

Is it possible to obtain the results, such as shear stress, nornal stress, etc. at the contact surfaces connected with \*tie?

---

<div class="post-metadata">

**Author:** ![Calc\_em](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@Calc\_em](https://calculix.discourse.group/u/Calc_em)\
**Post date:** [September 23, 2025, 1:38pm UTC](https://calculix.discourse.group/t/contact-results-for-tie-contact/2879/2 "2025-09-23T13:38:10Z")

</div>

Not for tie constraints (`*TIE`) but you could use tied contact (`*SURFACE BEHAVIOR=TIED`) for this purpose.