# Calculix solver breaks/terminates without an error with models larger 250k elements **URL:** \ **Category:** Uncategorized\ **Created:** [December 8, 2023, 2:27pm UTC](https://calculix.discourse.group/t/calculix-solver-breaks-terminates-without-an-error-with-models-larger-250k-elements/1958 "2023-12-08T14:27:43Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![loopluc](https://avatars.discourse-cdn.com/v4/letter/l/b3f665/32.png) [@loopluc](https://calculix.discourse.group/u/loopluc)\ **Post date:** [December 8, 2023, 2:39pm UTC](https://calculix.discourse.group/t/calculix-solver-breaks-terminates-without-an-error-with-models-larger-250k-elements/1958/2 "2023-12-08T14:39:06Z")
After using other search terms i found this post: > [@Steady state dynamics randomly terminates without error](https://calculix.discourse.group/t/steady-state-dynamics-randomly-terminates-without-error/1279/4): > > I can confirm similar behavior in a resonance analysis I did some months ago using CalculiX 2.19. I reduced the mesh size so fewer equations needed to be resolved (for me, any mesh resulting in less than 25000 equations worked). At the time, I thought it was something wrong with my machine like a lack of RAM or something like this. At the time I didn’t get any errors, the analysis just stopped, and even though I’m not sure when I think the last message was something about matrix composition jus… but have to try if this helps also in static calculations --- _[View the full topic](https://calculix.discourse.group/t/calculix-solver-breaks-terminates-without-an-error-with-models-larger-250k-elements/1958)._