# "Beam Element" and Explicit Time Integration

**URL:** <https://calculix.discourse.group/t/beam-element-and-explicit-time-integration/636>\
**Category:** Uncategorized\
**Created:** [June 23, 2021, 7:11pm UTC](https://calculix.discourse.group/t/beam-element-and-explicit-time-integration/636 "2021-06-23T19:11:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![leomazz](https://avatars.discourse-cdn.com/v4/letter/l/ce73a5/32.png) [@leomazz](https://calculix.discourse.group/u/leomazz)\
**Post date:** [June 23, 2021, 7:11pm UTC](https://calculix.discourse.group/t/beam-element-and-explicit-time-integration/636/1 "2021-06-23T19:11:40Z")

</div>

Hi there.

I’m new to calculix and I must say that I made a huge research of Open Source software for FEM. I’m familiar with Ansys and LS-Dyna and got a bit frustrated when I realised that the ‘Beam’ element (B32) is actually expanded to a hexaedron.

I’m simulating pretty long beams (such as risers or cables) with small cross section areas.

The problem arises when I create an explicit integration simulation. The expansion for a solid element creates quite small edges resulting in ridiculously small integration time steps. I may use Implicit time integration, but the computational cost may differ significantly.

Time steps for a Beam element shouldn’t be function of cross section area, as happening here. Does anyone implemented a true Beam element?

Thank you so much in advance!

Best regards

---

<div class="post-metadata">

**Author:** ![jbr](https://avatars.discourse-cdn.com/v4/letter/j/ecccb3/32.png) [@jbr](https://calculix.discourse.group/u/jbr)\
**Post date:** [June 28, 2021, 3:51am UTC](https://calculix.discourse.group/t/beam-element-and-explicit-time-integration/636/2 "2021-06-28T03:51:57Z")

</div>

I think you could create your own user element. From page 140 of the current (2.17) manual,

> An example for a 3D Timoshenko beam element (for static linear elastic  
> calculations and small deformations) according to [92] is implemented as element  
> “U1” in CalculiX. It is used in example userbeam.inp in the test suite. The  
> reader is referred to files resultsmech u1.f, e c3d u1.f and extrapolate u1.f for  
> details on how a user elements is coded."
